Jason Clarke Antiques has dated this piece to the 1800s.
Enclosed in its original fitted campaign mahogany case, this superb George III telescope is comprised of a mahogany barrel with brass fittings measuring 98cms when closed, 124cms when fully drawn and holds a two inch objective lens.
The draw is engraved with the maker’s name of Gilbert & Sons London with “improved” below. The case also comes complete with it original secondary eyepiece for higher powered magnification.

This design of telescope had been produced by Gilbert from circa 1793 and was conceived during his partnership with James Gilkerson which began in that year. Examples by Gilbert & Gilkerson are noted as being engraved as “Improved Sea Telescope” so the reduction to “Improved” on this example suggests a later attempt to market the telescope to a wider audience. The removal of the maritime focus may have tempted those without their sea legs! As is related below, the partnership with Gilkerson seemed to overlap with Gilbert’s transition to Gilbert & Sons by three years (1806 to 1809) so it is possible that the same instruments were being marketed with slightly differing detail at the same time.

A paper label pasted to the inside of the lid is also the same as was provided in Gilbert & Glkerson examples of the period. It reads:
“The achromatic object glasses of these telescopes are made to separate, by unscrewing the brass cell that contains them; observe it should not be done unless a damp appears between them, and then the greatest care is necessary to relplace them exact as they were, or the telescope will be spoiled. Each glass has a notch on the edge, which permits it to fall into the cell on a small wire, and prevents their moving. The same surfaces of the glasses must touch each other; to know they are right, a circle (o) is made on the surface of each glass, near the notch, which are to be placed in contact with each other.

N.B The convex side of the object glass must be next the object viewed”
A hugely interesting marine telescope. Some wear to the first draw requisite with age but a working example from a very famous marine instrument making family of the period.

During the eighteenth and early nineteenth centuries, the Gilbert family of Tower Hill carried a huge reputation, rivalling that of the Dollond and Ramsden for their skill of manufacture. The first family member to come to prominence as a scientific instrument maker was John Gilbert Snr. After beginning an apprenticeship in 1709 with a John Johnson he began trading after the customary seven years in 1716, entering the Company of Grocers. In 1726, he is referred to by the scientist, John Peter Biester as the chosen maker for his “Portatoris”, an instrument intended to solve the issue of longitude by observing the moon’s distance from a known star as it crossed the meridian. Clearly the device was not ultimately successful for Biester but he was confident enough to show his work to Isaac Newton and The Royal Society which should give you a flavour of the circles in which the elder John Gilbert was already moving.

Amongst a number of apprentices, his son John Gilbert the younger was enrolled in 1736 and following his eventual freedom in the early 1740’s, the family traded as Gilbert & Son and notably acquired the sole rights to manufacture and sell John Hadley’s hugely popular patent reflecting quadrant. The elder Gilbert’s date of death is not recorded but he became a member of the Livery of the Grocer’s Company in 1749 alongside notable instrument makers Thomas Heath and the hugely renowned George Adams of Fleet Street.
It seems fairly certain that the younger was tra
Jason Clarke Antiques has dated this piece to the 1800s.
You can view the stock and full dealer information on the Jason Clarke Antiques Profile Page