How do you clean the winding mechanism?

Most winding screws just need a thorough wipe down with a dry cloth to remove old grease. Avoid using water or harsh solvents. Once clean, apply a light coat of standard machine oil or beeswax to the screw thread. Run the table in and out a few times to distribute the lubricant evenly.

My winding handle is missing from the table we bought yesterday and I was wondering if it is possible to get a replacement one?

Replacement winders are fairly easy to source. The sockets on most Victorian dining tables follow standard square drives of the period. You'll just need to measure the internal square hole in the winding mechanism with a set of calipers. Dealers and hardware specialists sell modern iron handles cast to fit those exact dimensions. Keep the new handle nearby but avoid leaving it permanently in the socket where it might get knocked.

Do the separate leaves need storing flat?

It is always best to store spare leaves flat in a dry environment. Leaning them against a wall for long periods can cause the solid timber to warp. Keep them in a room with a steady temperature. Changes in humidity shrink or swell the wood, which stops the dowels lining up when you try to insert them.

We have a gap between the two main halves when it is closed up and the clips underneath do not seem to pull it tight?

A gap usually means the internal runners are restricted by dirt or a slight warp. The brass clips are only meant to keep the top flush. Check underneath for obstructions. A loose screw on the runner often stops the frame from closing fully.

Home > Tables > Victorian Dining Tables > Page 3

Victorian Dining Tables in South East

← Page 3 of 4 →

Victorian dining tables are substantial wooden structures, often featuring extending telescopic mechanisms and turned legs, designed to handle large families and formal dinner parties in nineteenth-century homes.