How do you fix a wobbly top?

Start by checking the screws holding the bearer to the top. Wood shrinks over time, leaving these fixings loose in their holes. Tightening them carefully often resolves a minor wobble. If the movement is in the hinge or the birdcage action, the brass pins might be worn. You can replace loose pins with slightly thicker brass rod to restore a snug fit.

I want to buy one of these for a modern dining room, but will the central support handle heavy everyday use from a family?

Antique pedestal tables designed for dining are robust. Cabinetmakers used dense timbers and deep dovetails to handle the stress of daily meals. Make sure the base spreads wide enough. If the legs reach close to the outer edge of the surface, it will handle a typical family dinner without tipping.

Can they be dismantled for moving?

Yes, you can. Most tilt-top versions have a simple brass catch to release the top. Larger variants often have screws connecting the column to the block. Remove these to transport the base and top separately.

My table has a dark finish that looks almost black in some lights, should I try to strip it back to the bare wood?

Leave the finish alone if you can. Over generations, polish and natural oxidation create a dark patina that belongs to the piece. Stripping this away destroys the surface history. A good clean with a mild wax reviver will lift off the dirt without harming the original polish underneath.

Home > Tables > Pedestal Tables > Page 7

Antique Pedestal Tables Dated 1900 - 1920

← Page 7 of 10 →

Supported by a single central column resting on a shaped base or splayed legs, antique pedestal tables freed up floor space while providing a stable surface for dining or serving tea.