How do I raise the height of my table?

Many older rural tables sit lower than modern dining standards. People often add small wooden blocks or turned bun feet to the bottom of the existing legs. A cabinetmaker can splice matching timber onto the legs. If done well, this structural addition blends into the overall profile without looking out of place.

The table I am looking at has quite a large gap between two of the top boards, is this something that needs fixing?

Gaps between boards are common on antique farmhouse tables. Wide timber planks expand and shrink over decades of seasonal changes, eventually settling into fixed positions. Most people leave them alone. If the gap catches crumbs, you can brush it out easily enough with a stiff brush. Filling a large gap with rigid modern putty can cause new splits elsewhere. The wood always needs room to move.

What is the best wax for pine tops?

A clear beeswax polish works well. It feeds the timber and provides a soft barrier against spills. Apply it sparingly with a cloth. Buff it firmly once dry. Too much wax just attracts dust.

I need to fit eight chairs around one for my new dining room, what length measurement should I be looking out for?

You need roughly two feet of length per person along the sides. A table measuring six to seven feet usually seats three down each side and one at each end. Always check the distance between the legs, not just the top. Deep aprons or wide corner blocks eat into the actual seating space. Factor in the chair width too. Wide armchairs demand more clearance than plain dining chairs.

Home > Tables > Farmhouse Tables > Page 5

Antique Farmhouse Tables in Midlands

← Page 5 of 5 →

Antique farmhouse tables are sturdy, plank-topped workhorses built for daily life in rural kitchens, serving as both food preparation surfaces and gathering places for communal meals.