How do I stop the seat squeaking?

The noise usually comes from dry friction between the iron spindle and the socket plate. Lift the seat up to expose the metal threads. Apply a small amount of heavy grease or beeswax to the contact points. Avoid thin oils, as they tend to run down the spindle and stain the wooden base.

Can I replace broken wooden castors?

Yes, replacing damaged castors is a straightforward job. Turn the chair over and check how the old wheels attach to the leg ends. Most early wooden castors sit on a metal pin tapped directly into the timber. You can source period-appropriate replacements from restoration suppliers.

I have an old desk and I am wondering if the height of these old chairs goes high enough for a modern desk?

Antique revolving chairs were built for Victorian desks, which sometimes sit lower than modern office furniture. The threaded spindle gives you a few inches of adjustment. Measure the height of your desk before buying. A raised seat might bring your knees too close to the desk apron, especially if the piece has shallow drawers.

When adjusting the height on mine, it gets very stiff near the top and I have to use a lot of force to turn it. Is that normal?

It usually means the iron thread is damaged near the end or packed with a century of dust and old oil. Wind the seat all the way out and clean the threads with a wire brush.

Home > Chairs > Revolving Chairs > Page 2

Antique Revolving Chairs in South East

← Page 2 of 2 →

Antique revolving chairs feature a rotating seat mounted on a fixed base, originally developed to give clerks and scholars easy access to multiple desks without standing up.