How do I wind a chiming mantel clock?

Start by opening the front bezel to access the dial. Most have three winding squares. The centre square drives the time, the right side operates the quarter chimes, and the left powers the hour strike. Insert the key and turn it slowly. Most antique German clocks wind clockwise, but stop immediately if you feel resistance. Keep track of how many turns it takes. A standard eight-day movement usually requires about fourteen half-turns.

I inherited a heavy wooden wall clock that seems to run fast no matter what I do, how can I adjust the timekeeping so it is accurate?

Look at the bottom of the pendulum bob. You will find a small rating nut on the threaded rod. Turn this nut to lower the bob slightly. Lengthening the pendulum slows the swing down, which corrects a clock that runs too fast. Make small adjustments. A single turn can alter the timing by a minute a day, so wait a few days between changes.

Why does my clock strike the wrong hour?

The strike train has likely fallen out of sync with the hands. This happens when the hands are moved backwards past the hour. Move the minute hand forward to the next hour and count the strikes. Gently push the hour hand on its friction fit to point to the number you just heard.

My clock has two weights hanging from chains and one is much heavier than the other, does it matter which side I hang them on?

The heavier weight always powers the strike train. Striking a bell or gong requires more force than simply turning the hands. Hang the heavier one on the side that triggers the hammer. In most cases, this is the right side as you face the clock, but check the movement to be sure.

Home > Clocks > German Clocks > Page 3

Antique German Clocks from the 19th Century

← Page 3 of 3 →

Antique German clocks cover a broad spectrum of timekeeping devices produced across the region, ranging from wall-mounted regulators and cuckoo clocks to complex bracket and mantel forms built to track time and strike the hour in domestic spaces.