How do I clean a brass hall lantern?

Dust it with a soft brush first. If the brass is heavily tarnished, you can use a mild metal polish on a soft cloth. Wipe away any residue with a clean duster. Avoid getting polish on the glass, as it leaves a hazy film.

My grandfather left me an old railway lantern with a red glass window on one side, but I can't figure out how to open the front?

Railway workers needed secure equipment that wouldn't blow open on a moving train. Most of these models have a sprung latch or a sliding catch hidden near the top cowl. Push down firmly on the brass button or wire loop at the top. The front lens housing usually swings out on a heavy side hinge once the catch releases. If it feels stuck, do not force it. Decades of grit and old oil often seize the mechanism, so apply a drop of penetrating fluid and wait.

Can I wire an antique lantern for electricity?

Yes, many people adapt them for modern homes. The key is to route the flex without drilling holes in the original carcase. A qualified electrician can often pass wires through existing ventilation holes or the base of the old oil fount. They can fit a standard bulb holder inside the glass globe. Keep the heat output in mind. Modern LED bulbs are much cooler and safer inside an enclosed space than old incandescent bulbs.

I was wondering if it's safe to actually burn kerosene in a Victorian lamp I found at a car boot sale last week, or is it too risky?

It is generally safe if the fount is sound. Fill the base with a small amount of water first and set it on newspaper to check for pinhole leaks in the solder. Dry it out thoroughly before adding lamp oil. You must also inspect the burner to ensure the winding gear still raises and lowers the wick smoothly. Never leave an antique lantern burning unattended. Old metal gets very hot to the touch, and old glass often cracks from a sudden temperature shift.

Home > Lighting > Lanterns > Page 17

Antique Lanterns

← Page 17 of 18 →

Antique lanterns are enclosed lighting fixtures designed with metal or wooden frames and glass or horn panels, built to protect a candle or oil flame from outdoor wind and indoor draughts.