How do you wire an old standard lamp safely?

Rewiring requires a qualified electrician to ensure everything meets current regulations. They'll pull a new three-core flex up through the central channel and install an earthed metal lampholder at the top. Wooden columns sometimes have very narrow holes drilled down the centre. The electrician might need to use a flexible rod to guide the fresh cable through without snagging on internal splinters.

My brass floor lamp is dark and dull, so should I polish it back to a shine or leave the aged surface alone?

The dark surface is a natural patina built up over decades of air exposure. Many buyers prefer this aged look on antique floor lamps, as it shows the history of the brass. Polishing it back to bare metal requires chemical cleaners and abrasive rubbing. If you do choose to polish it, the brass will eventually darken again unless sealed with a clear lacquer.

What size shade fits a floor lamp?

A tall standard lamp usually needs a substantial shade to look balanced. Base widths of sixteen to twenty inches often work well. Check the fitting type before buying. Some attach to a gimbal frame, while others fix directly to the lampholder.

I have a tall wooden lamp that leans slightly to one side when standing on the rug, is there a way to straighten it?

A leaning column usually points to a loose connection at the base. Turn the lamp over and look for a large central nut or wooden thread underneath. Tightening this joint often pulls the standard back upright. If the base itself is warped, placing a felt pad under one edge corrects the stance on hard floors.

Home > Lighting > Floor Lamps > Page 3

Antique Floor Lamps

← Page 3 of 16 →

Standing tall on a heavy base, an antique floor lamp provides ambient or reading light to a room through a tall vertical column, usually crafted from turned wood or cast metal, topped with a shade and bulb fitting.