Antique Regency Old Sheffield Silver Plated Tea Urn Samovar C1820

This is a wonderful antique Regency Old Sheffield silver plated tea urn, Circa 1820 in date.

This handsome antique Old Sheffield samovar has been silver plated on copper, with a reeded finial, foliate handles and a decorative tap. It has half fluted decoration to the body and lid with gadroon borders, all typical of the period. It is raised on stylish on lion's paw feet.

This tea urn is of unique quality and design and will add an Imperial look to your surroundings, which is sure to make it a treasured piece for any discerning collector.

Condition:

In excellent condition. As an antique item, the samovar show signs of use commensurate with age, these minor condition issues are mentioned for accuracy and, as seen in the accompanying photographs, the samovr displays beautifully.

Dimensions in cm:

Height 45 x Width 35 x Depth 34

Dimensions in inches:

Height 1 foot, 6 inches x Width 1 foot, 2 inches x Depth 1 foot, 1 inch

Old Sheffield Plate - or ‘fused plate’ as it is sometimes known, was the first commercially viable method of plating metal.

The material was accidentally invented by Thomas Boulsover, of Sheffield's Cutlers Company, in 1743. While trying to repair the handle of a customer's decorative knife, he heated it too much and the silver started to melt. When he examined the damaged handle, he noticed that the silver and copper had fused together very strongly. Experiments showed that the two metals behaved as one when he tried to reshape them, even though he could clearly see two different layers.

Boulsover set up in business, funded by Strelley Pegge of Beauchief, and carried out further experiments in which he put a thin sheet of silver on a thick ingot of copper and heated the two together to fuse them. When the composite block was hammered or rolled to make it thinner, the two metals were reduced in thickness at similar rates. Using this method, Boulsover was able to make sheets of metal which had a thin layer of silver on the top surface and a thick layer of copper underneath. When this new material was used to make buttons, they looked and behaved like silver buttons but were a fraction of the cost.

The technique Boulsover developed was to sandwich an ingot of copper between two plates of silver, tightly bind it with wire, heat it in a furnace and then mill it out in to sheet, from which objects could be made.

Our reference: X0106