How do you fix a stuck loper?

Carefully pull it forward while wiggling it side to side. Damp weather causes the wood to swell, making them bind in their channels. Once out, rub a plain wax candle along the top and bottom edges of the slider. This lubricates the wood without damaging the finish.

I found an old bureau in my grandad's house and the flap sits at a wonky angle when opened, so is there a way to level the writing surface out?

The uneven flap is usually caused by the brass hinges bending over time or the wooden lopers wearing down. It happens when heavy weights rest on the unsupported edges of the lid. You can often adjust the level by replacing worn hinge screws or adding a thin timber shim above the lopers.

What goes in the tiny drawers?

The small internal drawers held writing sand and sealing wax. They kept the dusty elements of letter writing away from clean paper. Larger documents sat in the open pigeonholes, while the central cupboard secured private correspondence.

The key is missing for the top section of my bureau and it is currently locked shut, how can I open it without breaking the wood?

Never force the flap with a lever. You will split the grain or shatter the lock keep entirely. A local locksmith can usually pick a basic antique lever lock in minutes. They can then cut a new key to fit the original mechanism, keeping the piece intact and functional.

Home > Bureau > Fall Front Bureau > Page 3

Antique Fall Front Bureau

← Page 3 of 27 →

An antique fall front bureau is a case piece featuring a sloping lid that drops down to form a flat writing surface, concealing a fitted interior of small compartments above larger storage drawers below.