Can I put a modern mattress on one?

Most modern mattresses drop straight onto these frames. You'll need a slatted wooden base or a firm divan to sit across the side irons first. Early frames sometimes measure slightly wider or narrower than standard modern sizing. It always pays to check the internal dimensions between the side rails before ordering.

My frame seems to wobble quite a bit from side to side when I sit on it, so how do I fix the loose corner joints?

Wobbly frames usually suffer from worn dovetail joints. Over time, the cast iron tapers rub together and lose their tight friction fit. It isn't a difficult problem to solve. Wrap a small shim of thin sheet metal around the male part of the joint before dropping it into the corner block. This fills the gap and tightens the structure. Tapping the side rail down firmly with a rubber mallet locks it back into place. They're heavy pieces, so keeping the joints secure matters.

How do you clean the brass knobs?

Standard liquid metal polish works well on solid brass finials. Apply it with a soft cloth and rub until the tarnish lifts off. Take care if the brass feels loose or dented. Spun brass is thin and rough handling can crush the hollow caps.

We are trying to set up a Victorian iron bed we found in a barn, but the side rails are missing, can they be replaced?

Finding exact replacement side rails proves difficult. Foundries cast their own proprietary corner joints, meaning rails from one bed rarely fit the brackets of another. You won't easily find a matching set. Some specialist metalworkers modify modern angle iron to fit old corner blocks. They grind the ends to match the original tapered dovetails. You can also source generic bolt-on side rails, though this requires drilling through the original joints.

Home > Beds > Iron Beds > Page 9

Antique Iron Beds

← Page 9 of 10 →

Cast and wrought metal frames built to support a mattress, antique iron beds emerged as a sanitary alternative to timber bedsteads during the nineteenth century.