How do you dismantle a large Victorian wardrobe?

Look for screws under the cornice and above the base. Most large Victorian wardrobes break down into three or four manageable pieces for moving. The cornice lifts off first. You then pull the central hanging sections away from the base drawer unit. You'll need two people to lift the main carcases safely.

I live in an old house with uneven floors, so will a heavy piece like this sit properly without twisting the doors out of alignment?

Uneven floors will warp the carcase over time. This stops the doors from closing flush and puts stress on the hinges. You should pack the base with wooden shims. Use small wedges under the plinth or feet until the whole unit sits level and the doors swing freely.

Can I fit a modern hanging rail?

Standard brass rails screw directly into the wooden top panel. The dense timber holds modern fixings securely. Measure the drop accurately first. You'll need enough clearance above the base to let coats hang straight.

When buying a piece for everyday use in a modern bedroom, how much internal depth do I actually need to hang standard adult winter coats facing forward?

You need an internal depth of at least twenty inches to use modern hangers. Anything shallower forces sleeves against the doors. Many antique mahogany wardrobes were built shallower than this. Early examples often feature wooden pegs rather than a continuous rail system. Check the inside depth yourself. Don't rely on exterior measurements as the thick backboards and doors take up considerable room.

Home > Wardrobes > Mahogany Wardrobes > Page 3

Antique Mahogany Wardrobes

← Page 3 of 7 →

Antique mahogany wardrobes are substantial freestanding cupboards designed for hanging and storing clothes, typically featuring a deep reddish-brown timber exterior over a solid carcase.