How do you clean the fitted interior?

Use a soft brush attachment on a vacuum cleaner to draw out decades of dust from the pigeonholes. You'll find a clean, dry artist's paintbrush helps dislodge dirt from tight corners. Avoid liquid cleaners or polishes inside those small compartments. The unvarnished secondary timbers will soak up moisture, which causes the thin drawer linings to swell and jam in their runners.

I inherited one from my grandmother and the heavy sloped front seems to drop down too far when I try to open it up for writing, is there a fix?

The brass hinges have stretched over time, or the wooden lopers that support the flap are worn down. Pull the lopers all the way out and check if their top edges are grooved from years of the heavy fall sliding across them. A cabinetmaker can pack the hinges or glue a thin strip of matching timber to the top of the lopers. This raises the fall back to a level position and takes the strain off the hinge screws.

Why are some drawer linings pine?

Provincial makers used whatever secondary timber was cheap and close to hand. Pine was plentiful and easy to work. A pine carcase isn't a sign of poor quality. It just points to a different regional origin.

The key is missing for the main flap and all the drawers are locked shut, how can I get into the desk without breaking the wood?

Older locks are relatively simple mechanism designs. A local locksmith can usually pick them open on site using basic tension tools without damaging the walnut veneers or the brass escutcheons. Do not try to force the drawers open with a lever. The brass lock bolts are engaged directly into slots cut into the wooden carcase, and prying will split the wood apart. Once the unit is open, the locks can be unscrewed from the inside. You can then take them to a specialist to have fresh keys cut to match the original levers.

Home > Bureau > Walnut Bureau > Page 2

Antique Walnut Bureau Dated 1900 - 1920

← Page 2 of 2 →

An antique walnut bureau is a sloped-front writing desk with a bank of drawers below, designed to secure correspondence and provide a stable work surface in eighteenth-century households.