How do I clean brass bed knobs?

Use a soft cloth and a non-abrasive metal polish. Apply the liquid sparingly and rub gently to lift the tarnish. Leave the polish to dry to a haze before buffing it off. Avoid harsh wire wool as it scratches the soft brass surface.

I inherited a dark wooden bed from my great aunt and the side rails seem a bit loose when you sit on it, can I just glue them?

Do not use glue on the side rails. The joints on Victorian beds need to dismantle so the frame can pass through doorways and up stairs. Check the metal brackets where the rail meets the post. Often the screws holding these plates work loose in the timber. Remove the screws, pack the holes with wood slivers, and drive the screws back in tight.

What size mattress fits Victorian beds?

Antique frames rarely match standard modern sizes. You must measure the internal space between the side rails. Many companies manufacture custom mattresses for antique beds.

The iron bed we bought has lots of chipped black paint showing rusty metal underneath and I am wondering if getting it sandblasted ruins the history?

Sandblasting strips away the original layers and leaves a harsh raw surface. It removes the accumulated patina that collectors value in antique ironwork. Hand sand the flaking areas to treat loose rust. You can apply a rust converter to the exposed metal before touching up the black enamel with a fine brush.

Home > Beds > Victorian Beds > Page 3

Victorian Beds Dated 1900 - 1920

← Page 3 of 4 →

Victorian beds are robust sleeping frames constructed in heavy metal or dark timbers, designed with high headboards and matching footboards to anchor a nineteenth-century bedroom.