will a modern kingsize mattress fit?

Many late nineteenth-century frames will take a modern five-foot mattress. You might find a small gap at the edges or need a custom foam insert for slightly irregular wooden frames. Always measure the internal width and length between the rails before buying a mattress. Some provincial beds fall short of modern dimensions.

how to clean brass bed posts?

Wipe the metal with a soft damp cloth to remove dust. Avoid abrasive metal polishes on lacquered brass beds. These strip the factory coating and expose raw metal to the air.

I have a big old wooden bed frame that squeaks terribly every time someone rolls over, what can I do to fix the noise?

Squeaks usually come from loose metal bolts where the side rails meet the headboard. Tighten these fittings with a spanner to firm up the structure. If the noise persists, check the wooden slats under the mattress. Rubbing a dry candle over the ends of the slats sometimes stops the timber grinding.

Can you tell me if it is safe to use the original wooden side rails or should I get a metal frame for inside?

Original timber rails from the nineteenth century are typically thick and strong. They support heavy mattresses without trouble as long as the wood has no rot or deep splits. Inspect the brackets on the ends of the rails. If the metal joints remain firmly attached to the wood, you don't need a separate interior frame.

Home > Beds > Kingsize Beds > Page 4

Antique Kingsize Beds Dated 1900 - 1920

← Page 4 of 6 →

Antique kingsize beds are large, robust frames originally built to support substantial mattresses and heavy draped hangings, providing a wide sleeping area for grander households.