Can a standard modern mattress fit these frames?

Most original iron frames fall short of modern length requirements. An Edwardian double bed often measures just four foot six inches wide and struggles to hold a standard length mattress without overhang. You'll usually need a custom mattress or an extension piece. Specialist firms weld longer side irons to the original joints. This lengthens the frame without altering the head and foot boards.

My grandmother left me a brass bed and the metal looks very dull and brown in spots, should I polish it back to bright gold?

That brown dullness is tarnish where the original protective lacquer has worn away. Damp air reacts with the bare brass over decades. Polishing it back requires stripping the remaining lacquer entirely before using a metal abrasive. It's a messy job. Most dealers prefer to leave the tarnished patina alone as it shows the age of the piece. If you do polish it, you must reapply a clear metal lacquer or it will dull again within months.

Do wooden Edwardian beds dismantle easily?

Yes, wooden beds from this era usually break down into four main pieces. The headboard, footboard, and two side rails separate for transport. The side rails typically use a metal hook and slot system or long iron bed bolts. Turn the bolt anti-clockwise with a spanner and the frame pulls apart.

I have noticed some wooden beds from this period have small wooden wheels on the bottom of the legs, what were they used for?

Those small wooden wheels are castors. They made it much easier for domestic staff to pull the bed away from the wall when sweeping the floors and turning the heavy mattresses. Pottery and brass castors are also common on Edwardian beds. Many survive today, though they tend to stiffen up with trapped dust. It's worth checking they spin freely before pushing the bed across a modern wooden floor to avoid deep scratches.

Home > Beds > Edwardian Beds > Page 3

Edwardian Beds Dated 1900 - 1920

← Page 3 of 4 →

Edwardian beds are sturdy sleeping frames made from cast iron, brass, or timber between 1901 and 1910, reflecting a shift away from heavy Victorian designs toward lighter, more sanitary bedroom furnishings.