how to clean an antique brass bed?

Use a soft cloth to dust the frame. If the original lacquer remains intact, harsh metal polishes will strip it away and ruin the aged patina. For stubborn marks on unlacquered metal, apply a mild brass cleaner with fine wire wool. Work gently along the length of the tubing rather than scrubbing in hard circles.

I inherited my grandmother's old metal bedstead but it feels quite low to the floor. Did they originally sit higher off the ground?

Most of them sat high. The Victorians favoured deep horsehair mattresses piled on top of a sprung base, which added substantial height to the sleeping surface. Modern mattresses tend to be much thinner. If you put a contemporary foam mattress on an antique frame, the bed will sit noticeably lower than the original maker intended.

standard modern mattress fit?

Antique dimensions rarely match modern standards. A Victorian double often runs slightly narrower and shorter than today's equivalent sizes. Many buyers commission a custom-made mattress. This ensures it sits neatly and safely inside the heavy corner posts.

We are trying to set up our frame, but the side rails seem loose and the whole bed wobbles when we move. How do we fix it?

The side rails rely on a gravity-fed wedge joint. Turn the rail over and check the tapered cast iron drop-in fitting at each end. Years of use often wears these tapers down. You can fix the wobble by slipping a thin metal shim or a piece of card into the joint before you drop the rail into the post socket.

Home > Beds > Brass Beds > Page 5

Victorian Brass Beds

← Page 5 of 10 →

These metallic bedsteads consist of a headboard, footboard, and connecting side rails, originally developed to provide a hygienic, pest-resistant sleeping platform for Victorian households.