How do I wind a longcase clock?

Winding requires raising the internal weights using a crank key inserted into winding holes on the dial face, or winding the spring barrels via the designated arbors. Care must be taken not to over-wind the movement, stopping as soon as resistance is felt to protect the internal brass teeth and cords.

Where should I place a standing clock?

Position the piece against an interior load-bearing wall on a flat, stable floor surface to ensure the pendulum swings without interference. Avoid areas subject to direct sunlight, dampness, or extreme temperature fluctuations that affect wood and metal. Correct placement prevents the case from leaning and keeps the beat of the pendulum even.

What is the difference between grandfather and grandmother clocks?

Grandfather clocks are full-sized longcase timepieces standing over six feet tall, whereas grandmother clocks are significantly shorter versions produced in the 20th century. Granddaughter clocks represent an even smaller scale, typically measuring under five feet in height while retaining the pendulum mechanism.

How do I set the pendulum swinging?

Gently draw the pendulum bob to one side until it clicks or catches the escapement, then release it smoothly without pushing it too hard. Listen for a steady, even tick-tock rhythm; if the beats sound uneven, the case feet may need minor adjustment to level the clock.

Home > Antiques For Sale > Vintage Pendulum Standing Clock > Page 3

Vintage Pendulum Standing Clock

108 items · page 3 of 7

← Page 3 of 7 →

A vintage pendulum standing clock anchors a room with mechanical rhythm, offering the steady swing of a brass bob and the gravitas of a tall timber case.