how to clean old pocket watch dial?

Vitreous enamel dials need gentle handling. You can use a wooden peg dipped in a weak solution of mild soap and water to lift surface dirt. Never let water pool near the edges or seep through the centre hole. Solid silver dials often tarnish. A soft jeweller's cloth is usually enough to brighten them. Avoid abrasive pastes, as they can wear away the painted or engraved numerals over time.

I inherited this heavy silver watch from my grandfather and it ticks when I shake it but then stops after a few seconds, what could be wrong with it?

A watch that ticks briefly when shaken often has power reaching the escapement, but the balance is failing to swing freely. The oils used to lubricate the pivot points dry out over the decades, turning into a sticky paste that stops the wheels from turning. Sometimes the balance staff pivots are broken or worn down. A watchmaker will need to strip the movement, clean the parts in solvents, and apply fresh lubricants to get it running reliably again.

silver watch hallmarks meaning?

British silver watch cases carry assay marks stamped inside the back cover. These include a standard mark showing silver purity, usually the walking lion for sterling. You will also find a city mark indicating where it was tested. An anchor means Birmingham, while a leopard's head stands for London. The date letter is most useful. It changes every year, moving through the alphabet in different font styles and shield shapes.

My watch has a separate dial for the seconds hand at the bottom, why did they put it there instead of the middle?

Putting the seconds hand on a small sub-dial at the six o'clock position was the most direct mechanical solution for traditional watchmaking. The fourth wheel in a standard gear train rotates exactly once a minute, and its pivot naturally sits at that spot. Extending that pivot through the dial allows a small hand to be attached directly to the wheel. Moving a seconds hand to the centre requires extra gearing. That extra gearing adds friction and complexity to the movement, which early watchmakers preferred to avoid.

Home > Watches > Pocket Watches > Page 6

Antique Pocket Watches Dated 1900 - 1920

← Page 6 of 7 →

An antique pocket watch is a portable mechanical timepiece, originally designed to be carried in a waistcoat or trouser pocket, driven by a coiled mainspring and regulated by a balance wheel.