What size mattress fits these beds?

Antique walnut beds rarely match modern standard mattress dimensions. The side rails and internal structures were built before universal sizing became common practice. You usually need a custom-made mattress to fit the frame properly. Many specialists manufacture these specifically for antique furniture.

My bedroom floor is slightly uneven in an old house, so will a heavy wooden frame like this sit flat without twisting?

Heavy wooden beds cope well with uneven floors because the joints allow for slight movement. The corner bolts pull the frame together tightly but remain adaptable. Use small wooden shims under the feet if the wobble is noticeable. This stops the side rails from straining under the weight of the sleeper. Over-tightening the bolts to compensate for a bad floor will eventually damage the threads.

Can I dismantle the bed?

Most frames break down into four main pieces for transport. The head and foot separate from the two side rails when you undo the bolts. Store the iron hardware safely during transit.

I am looking at a bed with ornate carvings on the headboard and want to know how best to clean the dust out of the grooves?

A soft bristle brush works best for clearing dust from deep walnut carvings. Avoid using modern aerosol polishes as they build up a sticky residue in the recesses. Pass the brush gently over the cresting and side panels. A dry microfibre cloth is enough to wipe down the flat veneer sections.

Home > Beds > Walnut Beds > Page 2

Antique Walnut Beds Dated 1920 - 1940

← Page 2 of 2 →

Antique walnut beds are substantial wooden sleeping frames, typically featuring panelled headboards and matching footboards. They were originally built to support heavy mattress ticks and retain thick bedding while keeping draughts away from the sleeper.