Antique Fenders between £0 and £0
A fender is the low metal or timber kerb that stands on the hearth in front of the fire, holding coals and ash back from the room.
What Is A Fender?
Fenders came in with the raised coal-burning grate, laid across the hearth to keep coals, ash and sparks off the floor and floor covering. On Sellingantiques the category runs from plain three- and four-foot kerbs through pierced and serpentine fronts to tall wire-mesh nursery guards and seated club fenders with leather-topped end boxes.
Brass dominates, in 565 of 895 titles, and it's usually paired with iron or steel. Oak, copper, bronze and wrought iron form smaller populations. The single most likely thing you'll meet is a brass fender described as Victorian or simply 19th Century, sometimes with nothing more said than that.
Beneath that heading sit two clear recurring types. The seated club fender, with upholstered box ends flanking a rail, developed for gentlemen's clubs and country houses where people wanted to sit at the fire; club appears in 356 titles. The pierced brass kerb, its front cut with fretted openwork, is the other, at 62 titles.
Dating is mostly broad. 19th Century (226) and Victorian (190) together account for well over half the dated entries, so a 19th Century label may sit anywhere across a hundred years. Edwardian, 1900s, 1910s and 1920s labels are common in aggregate; Georgian and Regency are genuine but thin, and the dated field starts at 1750.
Where The Range Sits
Seating is the biggest single divide. A plain kerb is a barrier; a club fender is furniture you sit on, and the sampled titles at the top of the range specify buttoned hide, tan or green leather over the end boxes. Leather is mentioned in 153 titles, and the club form carries the great bulk of the upper range.
Then length and weight. Dealers reach for size as the boast, running through 4ft, 4ft6, 5ft, 5ft6 and a 7ft 6in pierced brass fender, up to an iron and leather club fender described as almost ten feet long. Heavy gauge, substantial and monumental do the same job in words.
The front is where decoration shows. Cast and wrought fronts with lion's paw feet, garlands, rosettes, grape and vine, dragons or putti sit well above the many titles that say only "Brass Fender". Material follows the same line: gilt-bronze, ormolu and copper at the top, plain cast iron and black-finished steel at the bottom.
Retail Price Guide 2026
Typical UK retail prices for fenders between £0 and £0, calculated from the Sellingantiques database of over a million retail prices indexed since 2003. This retail price guide relies exclusively on Sellingantiques data; no external sources or auction records are used, so the figures do not describe the wider market.
Continental fenders are the rarest sort in the Sellingantiques archive, with only 26 titles saying French, mostly gilt-bronze and ormolu chenets.
The Antique Fenders between £0 and £0 Glossary
- Club fender
- A fender with upholstered or timber seats on the end boxes, made to be sat on. The word appears in 356 titles, the largest recurring type in the category.
- Kerb, or curb
- Used interchangeably with fender for the low solid-fronted type, with no seating.
- Nursery fender
- A tall fender, usually mesh-topped, enclosing the fire against children. So close in build to the club fender that dealers title one piece "Nursery Fire Guard or Club Fender".
- Pierced
- A brass or steel front cut with a fretted openwork pattern, against a plain solid front.
- Serpentine
- A front shaped in a shallow S-curve rather than running straight across the hearth.
- Extending, or adjustable
- Side rails that slide to fit different fireplace openings; the two terms cover 66 titles between them, from Georgian brass through to 1930s club fenders.
Frequently Asked Questions
What is a club fender?
It's a fender with seats built onto the end boxes, usually leather-topped, flanking a rail you can lean against. It grew up in gentlemen's clubs and country houses where people wanted somewhere to sit at the fire.
On Sellingantiques 356 titles use the word club, and 153 mention leather. Brass and wrought iron are the usual frames.
How old are most fenders on the site?
The dated field spans 1750 to 1960, with 327 listings carrying a clean year. 19th Century and Victorian labels dominate, so a great many sit somewhere in that century without a tighter date.
Early twentieth-century tags are common taken together: 1900s, Edwardian, 1910s and 1920s. Georgian and Regency entries exist but are thin on the ground.
Which materials turn up most?
Brass, in 565 of 895 titles, and it's usually combined with iron or steel. Cast iron, wrought iron and steel are the regular partners.
Oak, copper and bronze form smaller groups. Gilt-bronze and ormolu appear mostly on French chenet fenders, of which there are 26 titles.
Are nursery fenders the same as fire guards?
They overlap. A nursery fender is a tall fender, commonly with wire mesh, that encloses the fire against children, and 67 titles use the term.
Guard appears in 78 titles and fire guard in 61. The build is close enough to a club fender that dealers sometimes title one piece as either.
What does an extending fender do?
The side rails slide in and out so the fender fits different fireplace openings rather than one fixed width.
Extending appears in 37 titles and adjustable in 29. The feature recurs from Georgian brass right through to 1930s club fenders.
Do fenders carry maker's names?
Not in this category. A scan of the listings for maker candidates returned nothing at all, so names are not how these pieces are described or sorted.
What dealers give instead is material, form and length: brass and iron, pierced or serpentine, four foot or five foot six.